Support
Need Help ?
assistant_photo
(+39) 02 87165556 (+39) 02 87165556 • [email protected] Mail
- FREE RETURN
in 100 Days - FAST DELIVERY
3/5 days worldwide
assistant_photo
(+39) 02 87165556 (+39) 02 87165556 • [email protected] Mail
- FREE RETURN
in 100 Days - FAST DELIVERY
3/5 days worldwide
Chimney Fan for round flue Electric Chimney Fan Copper Model Chimney Ventilation Fans Rooftop Inducer Fans Chimney Exhaust Fan F
The professional chimney aspirator withstands even chimney fires of up to 700 degrees. Thanks to the 6-speed control unit supplied with the appliance, a perfect draught can be regulated even in the case of an uneven chimney.
- Resistant up to 700°.
- 8-year guarantee
- Up to 3800 m³/h (equipped with 6-speed controller)
- CE certified product
- Universal (for any chimney)
£459.00
£729.00
- 37.04%Lowest price in the last 30 days 729.00 £
VAT included
Payment Methods
940Videoreviews
CHIMNEY ASPIRATOR
GEMI ELETTRONICA
Professional Model Steel
round chimney
Universal
One product
for a thousand uses.
The Gemi smoke extractor is ideal for:
Fireplaces, heating fireplaces, stoves,
Ovens, Rotisserie, Pizzerias,
Barbecues, Kitchen hoods,
Restaurant
Unique.
20 reasons
for choosing it.
The solution to the problem
of your chimney smoke
is Gemi Elettronica!
Simple.
Mount it? A
child's play.
If you're wondering
how to assemble it, we have the
the answer for you...
Indestructible.
Resistant even
to a fire!
If your chimney
catches fire, our
vacuum cleaner will still work!
Innovative.
How is
the Gemi aspirator?
A concentrate of engineering
and innovation are the basis
of smoke extractor technology...
Also square.
We adapt
us to you.
Is your chimney square?
No problem,your
model can be found here:
Attention to detail.
Grid
protection grid.
Robustanti-volatile.
(compliant with standard UNI ISO 13857)
made of
electrowelded steel rings.
Beautiful.
Engine cover.
inStainless steel AISI 304,
Guaranteed resistance
resistance over time to atmospheric agents
and saltiness.
Unstoppable.
The most powerful:
up to 3800 m³/h.
We will solve your problem.
Rest assured.
For every size...
Always a
solution...
Choose the diameter of
your external chimney
(not the internal one) in the
drop-down menu
Easy to install
with the external screw
tightening screw
I will make your aspirator
immovable in time
Differences between
Gemi models?
BASE
PRO
STEEL
COPPERYEARS OF GUARANTEE
3
6
8
8
SUCTION POWER
(x1000 M³/H)
2.5
3.8
3.8
RESISTANT UP TO...
300
300
700
700
CLASS H MOTOR FOR HIGH TEMPERATURES
EXTERNALLY PROTECTED WIRED CLAMP
EXTERNAL STRUCTURE IN AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL FAN
HIGH RESISTANCE TO CORROSION
REAL COPPER PLATED VACUUM CLEANER
Secure and certified.
Since 1983,
attention to
your safety.
We have always invested in
research, innovation and security.
Thanks to this vision, we have
obtained all the best
certifications worldwide.
Dimensions
Electricity diagram
What do our customers say?
The most loved in the world.
Our
customers say so.
The first in the world in its
category thanks to
thousands of positive reviews
from all over the world on TrustPilot.
Our video reviews.
Discover the opinion of
who has tried it.
Hundreds of videos received
by customers just like you.
Why install a Gemi smoke extractor?
- Resolving the smoking problem100 % guaranteed.
- It does not suck in the heat,but only the smoke from your chimney.
- Very silent,even at high speeds.
- Low electricity consumption,maximum 10 € per year consumption.
- Easy to install even DO-IT-YOURSELF(follow the video tutorial).
- Universal,for all flues (including round ones).
- Reduces by 70%the accumulation of soot in the chimney.
- Can also be used in summerfor natural air exchange.
- Equipped with 6-speed regulator.
- Does not require maintenanceover the years.
- Even when switched off, it does not obstruct the normal release of smoke.
- Can be used as as a blower for the initial lighting of the chimney.
- When cleaning the chimney ashit avoids dispersion of the ash into the environment.
- It totally eliminates the inhalation of carcinogenic smokes escaping from the chimney.
- Product return rate is 0.05 % (5/10000)
- 100% MADE IN ITALY:patented by our company in 1983, it is still produced in Italy nowadays.
Shipping times and costs?
We deliver all over thethe world in 3/8 days
working days.
Find out all times and costs here:
How can I pay?
More than 10 methods
of payment.
Does the vacuum cleaner have a guarantee?
3 Years
guarantee.
On any component
of the vacuum cleaner
(electrical part or structure).
100 days to reconsider.
Satisfied
or refunded.
We will not need
any explanation.
We will collect the product at our expense
and you will get your refund
Why buy
an aspirator?
Other
trademarks
Certified product
Technical values verified by Unibas University
Suction capacity of 2500 M³/h
6-speed regulator (autotransformer)
Manufactured since 1983
3-year warranty
Free return for 100 days
Factory price (without intermediaries)
Verified reviews on Trustpilot
The advantages of buying from the
factory.
Free advice until resolution of the
of the problem.
You will be answered on the phone by our
specialised technicians with years of
experience in the field.
Call now at (+39) 02.87165556
or write to:[email protected]
2) Do you have a problem with one of our products?
We will immediately replace the product
3) Factory prices. Save
by not buying from resellers.
4) 40 years of experience in the industry
at your service.
5) Designed and entirely manufactured
in Italyin our production facility
of over 10,000 square metres
ASPIR/ACCIAIO/TONDO
75 Items
Specific References
- EAN13
- 8053017261607
New product
Questions and Answers
What is the difference between the various models of smoke extractors?
The basic model has a suction capacity of 2500 m³/h, a 3-year warranty and can withstand up to 300 degrees.
The professional model can withstand up to 700 degrees (therefore also in case of a chimney fire) and is recommended if you have a chimney of less than 3 meters. It also has a 6-year warranty and sucks in 3800 m³/h.
The steel model is built entirely in Aisi 304 stainless steel, a material that ensures greater resistance to corrosion and saltiness and therefore over time. It has a suction power of 3800m³/h and a resistance of up to 700°, guaranteed for 8 years.
The top of the range offered by Gemi is the professional copper model, resistant up to 700°, with a 10-year warranty and capable of sucking up 3800 m³/h. The stainless steel fan resists corrosion and saltiness. It is fully painted on the outside (including the base) and is therefore suitable for those looking for a more aesthetically pleasing product.
Does the chimney extractor fan also extract heat?
Our electric smoke extractor has a 6-speed regulator, so you only need to set it to speeds of 1-2 to help extract smoke naturally, but not heat.
Basically, at the first two speeds, we are not altering in any way the normal operation of a fireplace, which would normally disperse a very small amount of heat in the smoke rising in the flue pipe. The Gemi chimney fan sucks up the smoke that would otherwise go into the house and therefore, certainly, would not produce any heat sources for the indoor environment.
It is clear that if the chimney fan does not operate at the sixth speed (usually at this speed it is used to change the air in rooms, to help start fires or to suck up the ashes), with its 2500m³/h(basic) - 3800m³/h(pro) it will be so powerful that it will also suck up the heat, because it will increase the speed of combustion of the wood and consequently partially reduce the heat. Scientific studies have shown that the Gemi smoke extractor can control heat loss, so it is advisable to use a chimney to prevent heat loss.
This can be seen in the millions of satisfied customers all over the world since 1983, when the first Gemi chimney fan was created.
What is the size of the chimney smoke extractor?
The base of the electric chimney fan is standard 43x43 cm, the height is 35 cm, without the brackets. Considering the brackets it is 50 cm. For more specific measurements, a diagram showing the measurements of each individual part of the electric fireplace extractor fan is available on our website.
Is the electric fireplace extractor fan used for smoke abatement?
The function of the smoke extractor is to regulate the draught of the chimney, in order to solve the problem of smoke in the chimney, oven, stove, barbecue and to reproduce the natural draught of the chimney.
How to assemble the Gemi extractor smoke extractor?
The assembly of the chimney smoke extractor is do-it-yourself. Watch the tutorial video on the product sheets to assembly the chimney fan.
If you encounter problems with the installation of the extractor fan, you can ask for the help of an electrician or a bricklayer.
If you have any doubts about the installation of the product (e.g. connection of wires, speed regulator, etc.) our specialist technicians will be at your disposal via email, chat or telephone.
With a square chimney and internal pipe, what model should I buy?
If you have a square chimney with a pipe of the same height as the masonry, you must first close the gap between the pipe and the masonry and then install the chimney fan directly on the masonry. Similarly, if the pipe is only a few centimeters (or inches) high, the pipe must be brought to the same height as the masonry.
In this situation you have to buy the model of chimney fan with square base, adjustable also for rectangular chimney.
Is it possible to run the cable inside the chimney?
Yes, it is possible. There are two ways to make the electrical connection: with the 3 x 1.5 cable (to be run outside the chimney up to the speed regulator) in order to extend the first metre attached to the chimney fan.
Or you can make an internal connection to the chimney with our high-temperature resistant cable, which you can purchase separately by selecting the desired quantity in the drop-down menu according to how many meters you need.
How long can I leave the chimney smoke extractor on?
There is no time limit. The chimney smoke extractor can work all day without any problem.
At what distance from the flame should the chimney fan be placed?
The professional fan for fireplaces can be installed at any height, even on flues of 1 meter. On the other hand, the basic model of the chimney fan is recommended for chimneys over 3 m high.
If the power goes out, and the chimney fan switches off, does it plug the smoke outlet?
No, the chimney fan does not plug the smoke outlet if it is switched off. For this reason it is possible to switch on the chimney fan only in certain situations, for example when raising the stove door or in case of strong wind.
If it rains, will water seep into the chimney fan?
No, the base of the chimney smoke extractor has been raised to prevent water infiltration in the event of rain.
Does the chimney fan solve the problem also in case of strong wind ?
Certainly, our chimney fan is suitable in case of strong wind because it solves the problem of smoke.
Can it be mounted on a very high round chimney ?
Yes, thanks to the suction power of the chimney fan there is no problem even on chimneys longer than 50 meters.
Can it be mounted on a round chimney base?
Yes, we supply adapters for round flues (those indicated in the product drop-down menu). To order the adapter, simply select the round flue and choose the size of the adapter you wish to purchase from the drop-down menu.
You have to take into consideration the external diameter because our adapter for flues fits externally to its outlet. If the chimney has an external diameter of 25 cm, the ideal chimney adapter will be 25 cm in the drop-down menu.
Is the chimney smoke extractor noisy?
No. The chimney fan is silent at any speed. Of course, if you set it to the sixth speed, the fan makes more than 1300 revolutions per minute, so you will hear a slight humming sound. But to solve the problem of smoke, the fan should be used at low speeds, from the first speed up to the third speed. At these speeds the sound pressure does not exceed 38 Db, i.e. zero noise.
How much does the chimney fan weigh?
The weight of the fan, excluding the speed regulator, is about 20 kg.
Where should the chimney fan regulator be installed?
The regulator of the chimney fan for fireplaces must be connected to the 220 V current and can be installed in any area, the important thing is that it is not placed near heat sources. In fact, inside the regulator of the chimney fan there is a transformer that works at high temperatures.
I have recently purchased the chimney fan, when I switch it on at the first speed it does not...
There is no problem, the smoke extractor works normally. The chimney fan is designed to ensure normal running-in of the internal bearings. The fan should initially be run in at higher speeds and after a few minutes it can be switched to lower speeds.
This mode of operation should only be followed for the first month, after which it will also run at lower speeds.
The professional chimney aspirator withstands even chimney fires of up to 700 degrees. Thanks to the 6-speed control unit supplied with the appliance, a perfect draught can be regulated even in the case of an uneven chimney.
- Resistant up to 700°.
- 8-year guarantee
- Up to 3800 m³/h (equipped with 6-speed controller)
- CE certified product
- Universal (for any chimney)
Chimney Fan for round flue Electric Chimney Fan Copper Model Chimney Ventilation Fans Rooftop Inducer Fans Chimney Exhaust Fan F
£459.00
£729.00
- 37.04%Lowest price in the last 30 days 729.00 £
VAT included